This form is required for all residential building projects along with specific site and project data.
Draw site plan to scale, not less than 1-inch = 100-feet, show all property corners, existing and proposed structures, adjacent roads, all storage tank locations, all easements, well locations, emergency vehicle access, 2-foot contours, and north arrow. Many applicants incorporate the erosion, pollution, and stormwater control requirements of a site development permit into the site plan. This combined plan is sometimes referred to as an abbreviated plan or stormwater site plan.
Building Construction Drawings
Plans must be drawn to scale; preferred scale is 1/4" = 1'. Note dimensions on the plans. A complete set of drawings includes: foundation plan, framing plans, floor plans, cross sections, and elevations.
Structural Engineering Calculations
Required if the structure does not meet conventional construction standards.
Site Development Permit
Projects that add 500 square feet or more of new impervious may require a site development permit to ensure that erosion, pollution, and stormwater runoff are controlled during and after construction.
This permit is required in the following situations: 1) A new driveway approach is being constructed that will connect to a public road; 2) The project will be using an existing driveway approach that was never permitted or built to County standards; 3) The applicant proposes to modify or rebuild an existing driveway approach.